Conducting a good and proper interview is an art and there are some things that are required to keep the interview smooth and interesting throughout.
The interviewer must make the guest comfortable before going on air. Besides the technical sides of the interview, it is also pretty important for the interviewer to come ready and equipped with all the necessary stuff. When it comes to important things for interviews, microphones come out at the top of the list.
Without a proper microphone, your interview won’t give a professional touch and the audio quality is going to be compromised big time. Therefore, we have decided to take you through the list of Top microphones that are best suitable for interviews.
Before we get into the list, it is also pretty important to mention that shotgun and lavalier microphones are the most widely used devices when it comes to interviews. Therefore, we will be reviewing both shotgun and lavalier microphones on this list.
- List of Top Best Microphones for Interviews
- Best Microphones For Interviews Buyer Guide:
List of Top Best Microphones for Interviews
1. Mouriv CM208
The first device that comes to our mind when we think about conducting interviews is this amazing performer that goes by the name of Mouriv CM208.
It is also known as a TRS Dual-Head Lavalier microphone.
It works with an omnidirectional pickup pattern and it is a very well crafted condenser microphone for DSLR cameras such as Nikon and Canon. It also works perfectly well with PCs and iPhones.
It comes with a uniform frequency response and the unwanted noise pick up has been reduced to a great extent. It also comes with a very long cord and each side of this device is 7.8 ft long.
If you’re recording from a short distance then it’s not going to make any difference when it comes to quality. It has a long cord that allows the device to capture two different voices at the same time through a single device. Hence, making it an ideal choice for interviews.
It is a professional grade microphone that comes with an ability to offer crisp and clear sound quality because of its internal elements that are designed to record and produce high-quality sound.
The environmental sounds around you are going to be captured by its omnidirectional pickup easily and the long cord is going to allow you to move around freely. It is an ideal choice for all kinds of outdoor and indoor shootings and it comes across as one of the most top-rated devices on various online platforms.
It comes with a sensitivity level of 30dB±3dB/0dB=1V/Pa, 1 kHz and the frequency response is around 35Hz-18KHz. It is an omnidirectional condenser microphone that is suitable for almost all kinds of interviews and the standard operating voltage of 2.0V-10V.DC is going to take your listening experience to another level.
You don’t need any battery for its operational purposes and it is a plug-n-play device and it can be attached to your camera mic port easily. Once it is set, you’re on your way to record high-quality sound as far as your video content is concerned. You’re going to enjoy a unique recording experience because of its internal components that are designed in a way to produce high-quality and crisp sound.
2. Sennheiser MKE 400
Modern mirrorless cameras are quite high in demand these days because they have the ability to astonish you with the video quality.
If you’re a video content creator and you’re looking to conduct interviews as well then you’d need a high-quality microphone such as the Sennheiser MKE 400 to boost the sound quality as well.
The starting price of 289 dollars is pretty reasonable because they are only compatible with cameras that are coming at more than 1000 dollars.
Automatically, anyone who owns such a camera will have the ability to pay a few extra bucks and that is also a pretty valuable investment because microphones are the real heroes behind the quality of your video.
It’s a cool little microphone that slides into your camera’s flash mount and fits into your 3.5 mm microphone socket. Virtually every camera has the appropriate socket to capture serious footage.
You don’t need additional power for this microphone because it works with a single AAA battery and gives you almost 300 hours of operation. Two 6mm tall rubbery stalks are there to isolate the metal body of the microphone from the mount.
The frequency response is about 40 to 20,000 hertz and the maximum sound pressure that is being offered by this device is 126dB and that too in low sensitivity mode. It comes with 118dB sound pressure in high-sensitivity mode.
These stalks also serve as shock mounts while reducing the transmission of camera-handling noise to the Sennheiser MKE 400. You’d also get an inch-wide locking disc that is situated above the slide of the section of the mount and it helps in tightening up the grip on the mount itself.
3. Rode Reporter
We are talking about conducting interviews and the best microphones that are suitable for interviews. It is also important to understand that omnidirectional microphones that are coming with balanced XLR connections are the most widely used microphones by all the big media organizations that are conducting tons of interviews daily.
These microphones are used in these big organizations to connect to broadcast cameras and professional audio recorders. Rode Reporter is the perfect device for this purpose along with another amazing device that goes by the name of Electro-Voice RE50N/DB.
The Rode Reporter is a dynamic microphone that comes with balanced XLR analog outputs and it doesn’t need phantom power. This microphone is a pretty common device used in ENG organizations.
ENG means Electronic News Gathering and you will understand the importance of this device if you’re working in such an organization. It is very much suitable for interviews and the omnidirectional pickup is also pretty suitable for conduct a proper sit-on interview between two people using one microphone.
The Rode Reporter is almost 272.50mm long and it is not a very portable device. The extra length of Rode Reporter is beneficent in conducting interviews but it is important to note that it doesn’t have a traditional and special neodymium capsule. The Rode Reporter is 41.50mm wide and it comes with a published frequency response of 70Hz – 15 kHz.
4. NASUM Dual Wireless Headset
Another extremely versatile device that goes by the name of NASUM Dual Wireless Headset and it is a lavalier microphone that works really well with iPhones and DSLR cameras. You can use this microphone for your YouTube content and it can also be used for other purposes such as interviews and podcasts.
It comes with an exclusive patent high-speed sound transmission technology that gives you high fidelity sound and with no distortion at all. The background noise is going to be eliminated pretty neatly and this microphone is also pretty suitable for aspiring singers and vocalists.
It will make your sound quality more prominent and pure because of its longer operating distance that works up to 100 feet operating range. You can choose from almost 32 available frequencies and each and everyone wireless microphone unit comes with a unique ID code that enables the usage of multiple microphones. It is also pretty suitable for dramas, lectures, and church meetings that include a wide range of audiences.
It is another device that comes with a pretty neat plug-n-play setup because you only need to insert the NASUM wireless headset or collar microphone into the transmitter jack and then plug the wireless receiver into any 6.35mm mic input. You can also plug in a 3.5mm adapter to connect an iPhone, smartphone or laptop.
It is a pretty portable device and comes with a portable mini receiver along with two bodypack transmitters and two headset mics. There are two lavalier mics and one USB charging cable that is a dual-micro USB. It also has a headphone splitter and customers that have used this device for over two years are pretty satisfied with the performance of this amazingly talented performer.
5. Countryman B3
The Countryman B3 is another great addition to our list of best microphones for interviews because it comes with an omnidirectional pickup pattern and it is a lavalier microphone with standard sens and a hardwired 3-pin XLR connector. It is also a water-resistant device and it is a miniature lavalier microphone used for high-quality audio.
It is also quite capable of being used as a tie-clip lavalier microphone during interviews. You can also use this device as a hidden microphone for shooting fictional stuff and since this is a water-resistant device, you can also use it during reporting of water sports, etc. This microphone is also pretty useful for law enforcement agencies because they can use it as a spy-microphone by hiding it in different suspected places.
This device comes with a moisture-resistant capsule and that will enable you to place it in the hair and on bare skin as well. The omnidirectional pickup pattern of the device is also pretty good at handling the background noise along with eliminating the wind noise and popping plosives.
You’d also get a plethora of skin-matching colors and the 3-pin XLR cable is used for direct connection to the microphone preamplifier or a mixer. Its additional features and add-ons included a carrying case, two cable chips, and a windscreen with three protective caps.
- Ideal for interviews and podcasts
- Standard gain
- XLR cable
- Expensive and average sound quality according to some customers
6. Takstar SGC-598 Shotgun Mic
Before going into the review of the Takstar SGC-598, we want to clear one thing that this is not a professional microphone and provides audio of average quality. However, the amount of punch and warmth is good enough to consider it for various types of interviews.
The audio quality can be a little quiet because the microphone only works best in close ranges. It is an extremely suitable device for vlogging, close-in interviews, and voice-overs. Also, it should be noted that this microphone will take a little extra time when it comes to editing and eliminating unnecessary sounds.
The appearance and build quality of the device is pretty impressive and gives you a professional look, to say the least. The size is normal and it serves well as an on-camera mic as well as an off-camera microphone. This is a suitable device for short videos and interviews that are shot in close ranges.
As we have already discussed, this microphone is a great option for close-in recordings and interviews because it won’t work in situations where the microphone is 20 feet away from the subject. If you’re looking to record in small spaces with close audio interactions then this is a very suitable choice.
As far as its sound varieties are concerned, we felt that it creates a decent amount of bass with a male voice and doesn’t sound really appealing with the female voice. Overall, the device is not pretty appealing and professional as far as its audio quality is concerned, however; it is still very much acceptable because it does the necessary job and is available at a very much affordable price.
The most impressive thing about this microphone is perhaps its performance and price compared to other professional microphones that offer more or less the same performance with a lot of difference in price. It is a suitable device for all the budget customers that are looking to save some bucks but still need to have a close to professionally working microphone.
- Shock-resistant design
- It has 10dB sensitivity enhancement and 200Hz low-frequency attenuation
- High sensitivity condenser microphone
- Not a great quality audio
- Not suitable for professional usage
- Only suitable for close-in interviews and recordings
7. Electro-Voice RE50B
The Electro-Voice RE50B is a special kind of microphone that is used by various ENG organizations for the purpose of taking interviews, collecting news reports, and other stuff like that. The custom Dyna-Damp shock mount of this device is going to produce high-quality audio and will also play a vital role in eliminating the background noise.
It also comes with an integrated Acoustic-foam that keeps the wind and P-pop noise to almost zero whether you’re shooting outside or inside. It comes with a frequency response of 80 Hz to 13 kHz. It has a handheld form factor and it comes as an industry-standard microphone for interviews.
The device works with an omnidirectional pickup pattern and comes with a dynamic capsule and mono sound field. It has a built-in windscreen with a Circuitry Solid-State and the concept of mic-within-a-mic is really making huge strides in the market currently.
The impedance is at 150 ohms and the sensitivity level of this device is 1.6 mV/Pa (Open Circuit Voltage, 1 kHz). It comes with an XLR-3-pin Male cable for better connectivity and it is made of Aluminum and Zinc. It weighs around just 269 grams and its dimensions are ø: 1.9 x L: 7.8″ / ø: 48.3 x L: 198.1 mm.
8. Rode NTG-3
Another great addition to the list of best microphones for conducting interviews is this Rode NTG-3 and it is also known as the big brother of the NTG-2. It is one of the most expensive devices on the market and that is exactly why we have kept this at the end of the list.
If you have the budget then this microphone is going to give you a lot of value for its money. This microphone needs phantom power for operation and you must see that your audio recorder gives you that option.
If we talk about its core features then it is a super-cardioid condenser microphone that gives you the frequency response of 40Hz to 20 kHz and works at 48V Phantom power. It also has RF Rejection and Low Noise ability and the sound quality it produces is perfect for broadcasting and interviews. It is pretty lightweight at 163 grams and the price range of over $700 is going to be a significant problem for a lot of customers.
However, the bottom line is that the NTG-3 is an extremely well-made device with an integrated well-built audio instrument. It gives you a smooth response and the pickup pattern is pretty generous as well. You are going to feel very great if you work with this microphone because it also comes with an outstanding interference rejection that makes your job easier.
As we have discussed before, the NTG-3 is available at more than $700 and that might put off some potential buyers but if you have the budget then we would suggest going for this device without thinking too much and witness the results yourself.
Best Microphones For Interviews Buyer Guide:
There are a few factors that you need to consider before buying a good dynamic microphone for interviews. Let’s take a look at a few of them.
If you’re looking to buy a microphone then you first need to understand your requirements from the device. It is because there are a plethora of devices available on the market for different purposes and you need to be clear in what you want to achieve from your device.
Budget is another important thing to consider because the variety of microphones that is available on the market currently is in a huge number and you might get confused while pulling the trigger. Therefore, if your budget and requirements are set and cleared then you won’t feel any trouble in choosing the most suitable option.
Before choosing the best microphone for interviews, it is also pretty important to see and research about its compatibility with certain devices. What if you’re looking to buy a microphone for iPhone and you end up buying a non-compatible device with Apple products. Therefore, compatibility becomes really important because you don’t want to put yourself in that trouble.
Noise cancelation quality:
One of the most underrated qualities of a microphone is the elimination of unnecessary sound and background noise. If your microphone is doing a great job at recording your audio then it also means that the other side of the microphone that is dedicated to eliminating the background noise is also working perfectly fine.
People tend to forget the services of a microphone that are not very highlighted and you only realize these qualities when you hear the raw sound after the microphone has done its magic. Noise cancelation quality, therefore, becomes really crucial.
What microphone makes you sound better?
Ans: Neumann U87 is considered as one of the best in the business.
What do audio mixers do?
Ans: It takes two or more audio signals and merges them together.